These branch circuit breakers are available in two terminal configurations: standard box terminals that accept multiple conductors and ring-tongue terminals. All breakers mount on standard 35 mm DIN rail. Bus connectors and feeder terminal facilitate mounting and wiring of multiple miniature circuit breaker arrays in control panel assemblies. Breakers can also be reverse feed.
Complete range of UL 1077 recognized miniature circuit breakers up to a 125 A current rating
Breakers mount on standard 35 mm DIN rail
Standard ratings of 5kA at 480Y/277Vac, 10kA at 60/110Vdc (1P) and 110/220Vdc (2P)
Suitable for supplementary protection
Thermal-magnetic over current protection - three levels of short-circuit protection, categorized by B, C and D curves
Trip-free design - breaker cannot be defeated by holding the handle in the ON position
Captive screws cannot be lost
Fulfill UL 1077, IEC 60947-2 standard
Field installable shunt trip and auxiliary switch SUB_sequent mounting
Module width of only 0.71 in (18 mm) per pole (for 1-63 A)
Contact position indicator (red/green)
Possibility for locking the toggle in ON or OFF position