B1N UL 489 240 Vac; 60/125 Vdc Miniature Circuit Breaker
These branch circuit breakers are available in two terminal configurations: standard box terminals that accept multiple conductors and ring-tongue terminals. All breakers mount on standard 35 mm DIN rail. Bus connectors and feeder terminal facilitate mounting and wiring of multiple miniature circuit breaker arrays in control panel assemblies. Breakers can also be reverse feed.
Complete range of UL 489 listed miniature circuit breakers up to a 63 A current rating
Breakers mount on standard 35 mm DIN rail
Standard ratings of 10 kA at 240 Vac and 10 kA at 60 Vdc (1P) /125 Vdc (2P)
Suitable for branch circuit device protection
Trip-free design - breaker cannot be defeated by holding the handle in the ON position
Captive screws cannot be lost
For use in applications for which UL 1077 or CSA C22.2 No.235 are also allowed
Field installable shunt trip and auxiliary switch SUB_sequent mounting
Available with provisions for ring tongue terminals
Module width of only 0.71 in (18 mm) per pole
Contact position indicator (red/green)
Possibility for locking the toggle in ON or OFF position